Marker and feature
finding. I was dissatisfied with the so-called Marker
rods that were available, so I got Harrison to make me
one, to my specifications. It is simple called Marker.
This rod is the ideal 12' Marker rod, as far as I am
concerned.
This rod has good flex and ample power to put your marker
float wherever you want it and with little effort. The
tip has been stiffened and blended to maximise the
transverse vibration wave from the feature finding lead,
up the braid, down the rod, and into your hand. That is
what Marker rods should be all about, finding what's out
there.
Harrison also make a
Torrix Marker rod to match there Torrix carp rods.
Blank Length and Test Curve
Rings - Fuji SiC Titanium K-series
Rings - Fuji SiC K-series
Rings - Fuji Alconite K-series
Rings - Alps Z Lightweight
SiC
Rings - Kigan 3D
Lightweight SiC
( d = double leg ) ( Ld = low
double ) ( s = single leg )
Fuji K-Series
Alconites have a black colour frame
and the SiC have a gunsmoke colour frame.
Pewter coloured Kigan 3D on the left
Blue Grey coloured Alps Z on the right.
Part of the Torrix Marker blank construction.
1k 1k carbon in ultra matt finish
Handle Options
DPS Naked Jap and EVA
DNPS Naked and EVA
DNPS Full EVA
DPS Full cork flare
DPS Full EVA flare
DPS Mini Jap and EVA
No extra charge for the
handle options.
Other handle options are available but not illustrated
such as the full Jap shrink tube, etc.
Colour Options
Clear Gloss / Ultra Matt / Brown
Green / Claret Red
Other options are
available at little or no extra cost, such as rod
numbering, monogramming, line clips, etc, etc. I will
discuss this with you when we talk as it is YOUR
CHOICE, as it is CUSTOM BUILT.
